Makita DUC121 Manual De Instrucciones página 15

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Indicator lamps
6 Check button
7 Lock-off button
8 Switch trigger
9 Sprocket cover
10 Knob
11 Cutter
SPECIFICATIONS
Standard guide bar
Standard saw chain
Sprocket
Overall length
Chain speed per minute (min
Chain oil tank volume
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
WARNING: Use appropriate combination of the guide
bar and saw chain. Otherwise personal injury may result.
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
Explanation of general view
12 Guide bar
13 Arrow
14 Spring
15 Sprocket
16 Hook
17 Hole
18 Oil tank cap
19 Oil inspection window
20 Oil tank opening
21 Tip guide
22 Lower guide
Model
Guide bar length
Cutting length
Type
Type
Pitch
Gauge
No. of drive links
Number of teeth
Pitch
Net weight
–1
)
DUC121
2.5 kg
4.8 m/s (290 m/min)
D.C. 14.4 V
Cordless Chain saw safety warnings:
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw chain
is not contacting anything. A moment of inatten-
tion while operating chain saws may cause entan-
glement of your clothing or body with the saw chain.
2. When holding with both hands, always hold the
ENE090-1
chain saw with your right hand on the rear han-
dle and your left hand on the front handle. Hold-
ing the chain saw with a reversed hand configuration
increases the risk of personal injury and should
GEA010-1
never be done.
3. Hold the power tool by insulated gripping sur-
faces only, because the saw chain may contact
hidden wiring. Saw chains contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
23 Scabbard (chain cover)
24 Push nut
25 Slotted bit screwdriver
26 Filter
27 Locking ring
28 Washer
29 Limit mark
30 Brush holder cap
31 Screwdriver
DUC122
115 mm
11.5 cm
Carving bar
25 AP
6.35 mm (1/4")
1.3 mm (0.05")
42
9
6.35 mm (1/4")
422 mm
2.6 kg
5.0 m/s (300 m/min)
3
80 cm
D.C. 18 V
GEB119-1
15