Pioneer UDP-LX500 Manual De Instrucciones página 42

07
Setting
HDMI Mode
Also refer to Setting the HDMI Mode on page 18.
Color Space
When the connected HDMI device does not support YCbCr4:2:0, or an output resolution incompatible with
YCbCr4:2:0 is set, YCbCr4:2:0 signal may not be output even if YCbCr4:2:0 is set.
HDMI Deep Color
HDMI Audio Out
Control
To use PQLS function (page 19), Control must be set to On.
HDMI 3D
3D Notice
IP Address Setting
Proxy Server
Information
Connection Test
BD-Live Connection
42
En
Options Explanation
Single This is selected when connecting a device for use with the HDMI
OUT (MAIN) terminal only.
Separate Select this when you want to output the video and audio separately,
the video from the HDMI OUT (MAIN) terminal, the audio from the
HDMI OUT (SUB) terminal.
Pure Audio Select this to enjoy music only with a better sound quality when
devices are connected to both HDMI output terminals. With this
setting, music is output from the HDMI OUT (SUB) terminal only, and
video signals are only output from the HDMI OUT (MAIN) terminal
when DISPLAY is pressed.
RGB Select this to output the video signals as RGB signals. Choose this if
the colors seem too faint and the black seems too bright.
YCbCr4:4:4
Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr4:2:2 Select this to output the video signals as YCbCr 4:2:2 signals.
YCbCr4:2:0 Select this to output the video signals as YCbCr 4:2:0 signals.
Full RGB Select this to output the video signals as RGB signals. Choose this if
the colors seem too dense and all the dark colors are displayed in a
uniform black.
Auto
Select this to automatically output the optimal bit color.
10 bit Select this when outputting the video signals with 10-bit color.
12 bit Select this when outputting the video signals with 12-bit color.
Off Select this when outputting the video signals with normal 8-bit
color.
Bitstream
Select this to output HDMI audio signals directly.
PCM Select this to output HDMI audio signals converted to PCM audio
signals.
Reencode When a BD containing secondary audio and interactive audio is
played, the two audio signals are mixed and converted to Dolby
Digital audio or DTS audio for output.
On
Select this to control the player with the remote control of the
connected AV device using an HDMI cable. Also refer to page 18.
Off Select this when you do not want to control the player with the
remote control of the connected AV device using an HDMI cable.
Auto
With 3D discs, the disc is played with 3D images.
Off 3D images are not played.
Yes
This sets whether or not to display the 3D notice when playing 3D
images.
No
Select this to set the IP address of the player and DNS server (page 45).
Only set the proxy server if so instructed by your Internet service provider (page 45).
Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS
server (primary) and DNS server (secondary).
Select this to test the network connection (page 45).
Permitted
All discs are allowed to connect to BD-LIVE.
Partial Permitted Only discs whose safety has been confirmed are allowed to connect to
BD-LIVE.
Prohibited No disc is allowed to connect to BD-LIVE.