Pioneer UDP-LX500 Manual De Instrucciones página 57

Problem
The audio files stored on
components on the
network, such as a
computer, cannot be
played back.
The audio files stored on
components on the
network, such as a
computer, cannot be
played back.
Playback does not start.
The computer is not
properly operated.
Cannot access Windows
Media Player 12.
Video and audio playback
are undesirably stopped
or disturbed.
Check
The audio component on
the network which has
been switched off is
switched on.
Audio files recorded in
MPEG-4 AAC are being
played back on Windows
Media Player 12.
The folder stored on the
omponent connected to
the network has been
deleted or damaged.
The component is
currently disconnected
from this unit or the
power supply.
The corresponding IP
address is not properly
set.
You are currently logged
onto the domain through
your computer with
Windows 10 installed.
The LAN cable is
currently disconnected.
There is heavy traffic on
the network with the
Internet being accessed
on the same network.
Remedy
There are cases where a component with Internet security
software installed cannot be accessed.
Switch on the audio component on the network before
switching on this unit.
If the client is automatically authorized, you need to enter the
corresponding information again. Check whether the
connection status is set to "Do not authorize".
Check the audio files stored on the component connected to
the network.
Install Windows Media Player 12 on your computer.
Play back audio files recorded in MP3, WAV (LPCM only),
MPEG-4 AAC, or WMA. Note that some audio files recorded in
these formats may not be played back on this unit.
Audio files recorded in MPEG-4 AAC cannot be played back on
Windows Media Player 12. Try using another server. Refer to
the operation manual supplied with your server.
Check whether the component is affected by special
circumstances or is in the sleep mode. Try rebooting the
component if necessary.
Try changing the settings for the component connected to the
network.
Check the folder stored on the component connected to the
network.
Check the computer's network settings, security settings, etc.
Check whether the component is properly connected to this
unit or the power supply.
Switch on the built-in DHCP server function of your router, or
set up the network manually according to your network
environment.
The automatic configuration process takes time. Please wait.
Instead of logging onto the domain, log onto the local
machine.
Check whether the audio file was recorded in a format
supported by this unit.
Even audio files listed as playable on this unit may sometimes
not be played back or displayed.
Check whether the folder has been damaged or corrupted.
Connect the LAN cable properly.
Use 100BASE-TX/1000BASE-T to access the components on
the network.
08
57
En