General View Of Application; Application; Coating Materials - Titan Impact 400 Instrucciones De Uso

Impact 400
2

geNerAl vIeW of ApplIcATIoN

2.1

ApplIcATIoN

The unit performance is conceived so that its use is possible on
building sites for small- to middle-area dispersion work.
exAmpleS of oBjecTS To Be SprAyeD
The sprayer is able for all common varnishing jobs like doors,
door frames, balustrades, furniture, woodencladding, fences,
radiators (heating) and steel parts.
2.2

coATINg mATerIAlS

proceSSIBle coATINg mATerIAlS
Pay attention to the Airless quality of the coating
i
materials to be processed.
Dilutable lacquers and paints or those containing solvents, two-
component coating materials, dispersions, latex paints, release
agents, oils, undercoats, primers, and fillers.
No other materials should be used for spraying without Titan's
approval.
fIlTerINg
Despite suction filter and insertion filter in the spray gun,
filtering of the coating material is generally advisable.
Stir coating material before commencement of work.
Attention: Make sure, when stirring up with
i
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying and
can, in fact, lead to interruption of operation.
vIScoSITy
With this unit it is possible to process highly viscous coating
materials of up to around 20.000 MPa·s.
If highly viscous coating materials cannot be taken in by suction,
they must be diluted in accordance with the manufacturer's
instructions.
TWo-compoNeNT coATINg mATerIAl
The appropriate processing time must be adhered to exactly.
Within this time rinse through and clean the unit meticulously
with the appropriate cleaning materials.
coATINg mATerIAlS WITh ShArp-eDgeD ADDITIoNAl
mATerIAlS
These have a strong wear and tear effect on valves, high-
pressure hose, spray gun and tip. The durability of these parts
cane be reduced appreciably through this.
general view of application
7