Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONAC CLAMP METER
Note: The HOLD feature will activate when the Backlight is turned on.
Press the HOLD key again to exit Hold.
Backlight
The backlight function illuminates the display and is used when the
ambient light to too low to permit viewing of the displayed readings.
Press the
button for one second to turn the backlight on and
press the button a second time to turn the backlight off.
ZERO BUTTON
For ACA and Capacitance Zero & Offset adjustment.
Manual Ranging
The meter turns on in the autoranging mode. Press the Range
button to go to manual ranging. Each press of the range button will
step to the next range as indicated by the units and decimal point
location. Press and hold the Range button for two seconds to return
to autoranging. Manual ranging does not function in the AC Current ,
Diode and Continuity check functions
Battery Replacement
1. Remove the one rear Phillips head screw
2. Open the battery compartment
3. Replace the Requires two "AAA" batteries (UM4 R03)
4. Re-assemble the meter
www.grupotemper.com
www.grupotemper.com
KPF-02
11
12
KPF-02
OPERATING INSTRUCTIONAC CLAMP METER
Publicidad
