Quick Connect - Nokia 6301 Manual Del Usuario

provider's implementation of emergency call capabilities. Contact your net call
provider to check the internet telephony emergency call capability.
This device can detect and connect to a WLAN through call over local access. This
unlicensed mobile access (UMA) technology allows a seamless handoff of mobile voice
and data from a wide area cellular network to WLAN or wireless fidelity (Wi-Fi), so it
is possible to connect at a high speed to the internet from virtually anywhere.
If you move the device to another location within the wireless LAN and out of range of a
WLAN/Wi-Fi access point, the roaming function can automatically connect your device
to another access point that belongs to the same network. As long as you remain
within range of access points that belong to the same network, your device can stay
connected to the Wi-Fi network.
Features using WLAN/Wi-Fi, or allowing such features to run in the background while
using other features, increase the demand on battery power and reduce the battery life.
Turn on WLAN/Wi-Fi
Select Menu > Settings > Connectivity > Wi-Fi > Wi-Fi radio > On.

Quick connect

Quick connect allows you to connect to an open network with the best signal strength.
1. From the standby mode, select Go to > Quick connect or, from the Wi-Fi menu,
select Quick connect.
2. If the Wi-Fi radio is turned off, a message asks if you want to turn on WLAN/Wi-Fi
first. Select Yes.
3. If you are already connected to another network, a message asks if you want to
disconnect from that network. Select Yes.
The phone searches for networks and when the network with the best signal strength
is found, a message is displayed, which confirms the network connection. If you have
not saved the network, a message asks if you want to save it. Select Yes or No if you
want to save the network or not. If no available networks can be found, No quick
connect networks available is displayed.
67