Part Names; Front Panel - Onkyo TX-8270 Manual De Instrucciones

> Before Start > Part Names

Part Names

Part Names

(European models)
 

Front Panel

1. Í ON/STANDBY button
2. MENU button: Used to display the menu.
MEMORY button: Used to register DAB (European models)/AM (North American
models)/FM radio stations.
3. Play (1)/Pause(;) button: Used for play operations when playing Music Server or USB.
TUNING MODE button (North American models): Switches tuning to an AM/FM station
between automatic tuning and manual tuning.
TUNING MODE button (European models): Switches tuning to an FM station between
automatic tuning and manual tuning, and allows you to select the order for displaying
DAB stations.
4. HYBRID STANDBY indicator: Lights if the unit enters standby mode when the features
are enabled that continue to work when this unit is in standby, such as HDMI Standby
4
> Install
    
   
> Initial Setup > Playback
 
  
Through and Network Standby.
5. Remote control sensor: Receives signals from the remote controller.
0 The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on
the perpendicular axis and 30° to either side.
6. ZONE 2 button: Controls the multi-zone function (P33).
7. OFF button: Switches the multi-zone function off (P33).
8. Display(P5)
9. SETUP button: You can show advanced setting items on the TV and display to provide
you with an even better experience (P35).
10.Cursors (D / C / B / A), ENTER button: Select the item with the cursors and press
ENTER to confirm. Use them to tune to stations when using TUNER (P26, 29).
11. RETURN button: Returns the display to the previous state during setting.
12.VOLUME
13.PHONES jack: Connect stereo headphones with a standard plug (Ø1/4z/6.3 mm
Advanced Setup | Supplementary Information | Others
  
 
