Web Setup - Onkyo TX-8270 Manual De Instrucciones

> Before Start > Part Names

Web Setup

You can make the settings for network features for this unit in an internet browser on a PC,
smartphone, etc.
1. Press SETUP on the remote controller to display the Setup menu.
2. Select "5. Hardware" - "Network" with the cursors, then take a note of the IP address
displayed in "IP Address".
3. Start the internet browser on your PC or smartphone and enter the IP address of the unit
in the URL field.
4. Information for the unit (Web Setup screen) is displayed in the internet browser.
5. After changing the settings, select "Save" to save the settings.
Device Information
You can change the Friendly Name, set an AirPlay Password, etc.
Control4: Register this unit if you are using a Control4 system.
Firmware Update: Select the firmware update you have downloaded to your PC so you can
update this unit.
Network Setting
Status: You can see information for the network such as the MAC address and IP address
for this unit.
Network Connection: You can select how to connect to the network. If you select "Wireless",
select an access point from "Wi-Fi Setup" to connect.
DHCP: You can change DHCP settings. If you select "Off", set "IP Address", "Subnet Mask",
"Gateway", and "DNS Server" manually.
Proxy: Display and set the URL for the proxy server.
48
> Install > Initial Setup > Playback
Advanced Setup | Supplementary Information | Others