General Specifications - Onkyo TX-8270 Manual De Instrucciones

> Before Start > Part Names

General Specifications

Amplifier (Audio) section
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, from 20-
20,000 Hz; rated 100 watts per channel minimum RMS
power, with no more than 0.08% total harmonic distortion
from 250 milliwatts to rated output.
Rated Output Power (IEC) (Others)
2 ch k 160 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD
Maximum Effective Output Power (JEITA) (North American)
2 ch k 170 W at 6 ohms, 1 kHz, 2 ch driven of 10% THD
Dynamic Power (*)
(*)IEC60268-Short-term maximum output power
240 W (3 ≠, Front)
210 W (4 ≠, Front)
120 W (8 ≠, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance (1 kHz, 100 W/8 ≠)
200 mV/47 k≠ (LINE (Unbalance))
3.5 mV/47 k≠ (PHONO MM)
Rated RCA Output Level and Impedance
1 V/470 ≠ (SUBWOOFER PRE OUT)
200 mV/2.3 k≠ (ZONE LINE OUT)
Phono Overload
70 mV (MM 1 kHz, 0.5%)
Frequency Response
10 Hz - 100 kHz/i1 dB, j3 dB (Direct/Pure Audio)
Tone Control Characteristics
n10 dB, 90 Hz (BASS)
n10 dB, 7.5 kHz (TREBLE)
Signal to Noise Ratio
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
4 ≠ - 16 ≠
Headphone Output Impedance
330 ≠
Headphone Rated Output
80 mW (32 ≠, 1 kHz, 10% THD)
58
> Install > Initial Setup
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range (North American)
530 kHz - 1710 kHz
DAB Tuning Frequency Range (Others)
174.928 MHz - 239.200 MHz
Preset Channel
40
Network Section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 a/b/g/n standard
®
(Wi-Fi standard)
5 GHz/2.4 GHz band
BLUETOOTH Section
Communication system
BLUETOOTH Specification version 4.1+LE
Frequency band
2.4 GHz band
Modulation method
FHSS (Frequency Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2
AVRCP 1.3
HOGP-Host (Client)
HOGP-HID Device (Server)
HID Service (HIDS)
Supported Codecs
SBC
AAC
Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range
Line of sight approx. 48 ft. (15 m) (*)
> Playback
Advanced Setup | Supplementary Information |
(*)The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, cordless phone,
reception sensitivity, antenna's performance, operating
system, software application, etc.
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 230 V, 50 Hz (Others)
Power Consumption
260 W
0.1 W (Stand-by, North American)
0.15 W (Stand-by, Others)
35 W (No-sound)
4.2 W (HDMI Standby Through, North American)
4.5 W (HDMI Standby Through, Others)
2.6 W (Network Standby, North American)
2.8 W (Network Standby, Others)
Dimensions (W k H k D)
17-1/8z k 5-7/8z k 12-15/16z
435 mm k 149.5 mm k 329 mm
Weight
18.1 lbs/8.2 kg (North American)
8.7 kg/19.2 lbs (Others)
HDMI
Input
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (PC), IN4 (GAME)
Output
OUT
Supported
Deep Color, x.v.Color
Channel, 3D, 4K 60Hz, CEC, Extended Colorimetry
(sYCC601, Adobe RGB, Adobe YCC601), Content Type,
HDR
Audio Format
DSD, PCM
Maximum Video Resolution
4k 60 Hz (YCbCr 4:4:4)
Others
TM
, LipSync, Audio Return