Resetting The Oscilloscope; Displaying An Unknown Signal With Auto Set - Promax OS-782 Manual Del Usuario

USER'S MANUAL. OS-782
10. Press the "OSC
and press "OSC ◄" or "OSC ►" key to adjust the horizontal position.
11. Press the "OSC OPTION" key again and return back to step 1.
4.6

Resetting the Oscilloscope

If you want to reset the Oscilloscope to the factory settings, do the following:
1. Press "MENU" key and the function menu appears on the right side of the
screen.
2. Press the "MENU
options are visible at the bottom of the screen.
3. Press "F1" RESET key to select the factory settings. The oscilloscope is set
to be the factory settings.
See the following figure 9.
4.7

Displaying an Unknown Signal with Auto Set

The Auto-Set feature lets the Oscilloscope display and measure unknown signals
automatically. This function optimizes the position, range, time base, and triggering and
assures a stable display of virtually any waveform. This feature is especially useful for
quickly checking several signals.
02-2010
" or "OSC " key to adjust the trigger position of Channel 2
" or "MENU " key to select function setting and three
Figure 9.- Reset the Oscilloscope.
Page 20