Orbis CODITEL 2 Manual Del Usuario página 56

NB: The number of decimal numbers is the same as the multiplier, in the case of
previous example 2
NB: Each tag must be separated by at least 1 space inside the text
NB: The analogue input will be represented according to the settings defined by
command ADC
NB: maximum text lenght is 100 characters
NOTE: in order to chain several commands of the DIGTXT ADCTXT SCHEDTXT
and SENDALARM type in the same message it is necessary to insert the '*'
separator between one command and another
Example of programming the device to forward a daily SMS to some recipients:
-
define the complete tag message with the SCHEDTXT command
Example: SCHEDTXT today consumed #P1R litres of diesel
-
define the recipients of the message before entering them into the contacts:
Example: STAFF 2 82342 4 08234234
-
and then defining them as recipients in SENDALARM::
Example: SENDALARM SCHED 1 SMS 2 SMS
-
finally, define the scheduling interval with an eventual start offset (in minutes). If the
time is 11:45 am and I want a message at about 12 noon every day:
Example: SCHEDTIME 24 15
• Set the alarm ringing time (for admin only)
If you have chosen to send alarms ringing through phone (see control sendalarm) you
can set the length of the ring with the command:
MAXRING [number] where
[number]  duration of the ringing in seconds (values between 0 and 255).
By default, the duration of the ring is 15 seconds.
CODITEL 2 PROGRAMMING VIA PC
The USB port (type mini B) under the cover allows the connection between PC and
CODITEL 2.
Through this, you can send commands from the PC using a terminal program.
The connection sequence is as follows:
- 54 -
User Manual CODITEL 2