Electrical Connection - Avanti ER2001G Manual De Instrucciones

ELECTRICAL CONNECTION

•
The appliance must be properly installed and grounded b
with the National Electrical Code ANSI/NFPA No. 70 (Latest Edition) and local electrical code
Improper g rounding can result in the risk of electrical shock. If the power cord is damaged, have it
requirements. Installation should be made by a licensed
replaced by an authorized Avanti Products service center
•
The range may be connected by means of permanent "H
Power supply cord i
•
Use only 3-conductor or 4-conductor UL listed range cord rate
minimum voltage range. These cords may be provided w
•
The range must be con
rating label.
•
The range can be connected directly to the fused disconnect (or circuit breaker box) through
flexible, armoured or non-metallic sheathed, copper cable (with grounding wire). Allow two to
three feet of slack in the line so that it can be moved if servicing is ever necessary.
•
For personal safety, the range must be properly grounded.
•
Remove house fuse or open circuit breaker before beginning installation.
•
Do not attempt to repair or replace any part of the applia
in this manual. All other servicing should be referred to a
•
To minimize the possibility of electric shock, disco
before attempting any maintenance.
NOTE: Turning the appliance off does not disconnect th
recommend having a qual
s not supplied, but is available through your local electric supply house.
nected to the proper electrical voltage and frequency as specified on the
ified technician service your appliance.
WARNIN G y a qualified technician in accordance
electrician.
.
ard Wiring" or "Power Supply Cord Kit".
d at 40 amps with 125/250V
ith strain relief or conduit connector.
nce unless it is specifically recommended
qualified technician.
nnect this appliance from the A/C power supply
e appliance from the power supply. We
15