Anti-Tip Bracket Installation - Avanti ER2001G Manual De Instrucciones

ANTI-TIP BRACKET INSALLATION
To reduce the risk of tipping the range by abnormal usa
be secured by properly in
•
Place the anti-tip bra
side.
•
Mark the locations of the 2 holes of the ant-tip bracket on the floor.
•
Use a 5/16" masonry the drill bit and insert plastic anchor.
•
Secure the bracket to the floor using the screws supplied.
•
Slide the appliance into position.
NOTE: If range is relocated, the bracket must be removed and installed in new location.
Install the anti-tip bracket either right or left side.
The contour line of back panel of appliance
The contour line of front panel of appliance
stalling the anti-tip device packed with the appliance.
cket on the floor as shown figure. It can be installed on either right or left
1.30"
Anti-tip
Bracket
ge o r improper door loading, the range must
Move the appliance to the final position.
17
Anti -tip Bracket