Datos Técnicos; Safe Handling Of Gasoline; General Maintenance - Husqvarna MZ48 Manual Del Operador

DATOS TÉCNICOS
TORNILLOS HEXÁGONOS
Los valores de par indicados se deben utilizar como pauta
Grado
pies/lb Nm
1/4 9 12
5/16 18 24
3/8 31 42
7/16 50 68
1/2 75 102
9/16 110 149
5/8 150 203
3/4 250 339
7/8 378 512
782 1060
Grado Grado 8.8
pies/lb Nm
M4 1.5 2
M5 3 4
M6 5.2 7
M7 8.2 11
M8 13.5 18
M10 24 33
M12 43.5 59
M14 70.5 96
M16 108 146
M18 142 193
M20 195 264
M22 276 374
M24 353 478
M27 530 719
76
pies/lb Nm pies/lb
13 18
28 38 24
46 62 40
75 102
115 156
165 224
225 305
370 502
591 801
1410 1912
Grado 10.9 Grado 12.9
pies/lb Nm pies/lb
2.2 3 2.7
4.5 6 5.2
7.5 10 8.2
12 16 15
18.8 25 21.8
35.2 48 43.5
62.2 84 75
100 136 119
147 199 176
202 274 242
275 373 330
390 529 471
498 675 596
735 996 904 1226
SAFETY
•
roll over if a wheel is over the edge or the edge
caves in.
WARNING! Do not drive up or down hills
with slopes greater than 10 degrees. Do not
drive across slopes.

Safe Handling of Gasoline

WARNING!
Nm
much more care in handling gasoline. Gasoline is
33
54
•
other sources of ignition.
•
• Do not remove the gas cap or add fuel with
the engine running. Let the engine cool before
refueling.
• Do not fuel the
machine indoors.
•
machine or fuel
container where
there is an open
light such as on a
Nm
water heater or other appliance.
•
3.7
7
•
11
20
30
59
•
102
•
161
or trailer and refuel it on the ground. If this is not
239
328
container, rather than from a gasoline dispenser
447
nozzle.
639
• Keep the nozzle in contact with the rim of the
808
open device.
• If fuel is spilled on clothing, change clothing
• Do not start the engine near spilled fuel.
• Do not use gasoline as a cleaning agent.
•
not be started until problem has been resolved.
•

General Maintenance

• Do not use the
machine indoors
or in spaces
contain carbon
odorless and poisonous lethal gas.
CAUTION! Use protective glasses
•
those fastening the blade attachments, are
•
• Do not interfere with the intended function of a
•
manufacturer's recommended parts when
WARNING!
belt is removed.
• Do not change the settings of governors and
machine components could be damaged.
•
grass, leaves or other debris buildup. Clean oil
machine cool before storing.
9