Location and Function of Parts and Controls
Installing batteries
Insert two size AAA (R03) batteries in correct
polarity.
Be sure to install
the negative < –
end first.
• In normal operation, batteries will last up to half a
year. If the Remote Commander does not operate
properly, the batteries might be exhausted sooner.
Replace them with new ones.
• To avoid damage from possible battery leakage,
remove the batteries if you do not plan to use the
Remote Commander for a fairly long time.
When the Remote Commander does not work
Check if POWER/STANDBY indicator lights up.
Also, verify that the Remote Mode in Remote menu is
not set to "Off." The Remote Commander works only
when "Remote Mode: On" is selected and the display
is either powered on or in the standby mode.
For more details on the Remote Mode, see "Remote Mode"
on page 25 (GB).
12
(GB)