Picture/Sound Settings - Sony FWD-50PX3 Manual De Instrucciones

Picture/Sound Settings

For Video Input
Picture Mode
Picture Mode Adjust.
"Vivid": Select for enhanced picture contrast and sharpness.
"Standard": Select for standard picture settings.
"Custom": Allows you to store preferred settings.
"Conference": Adjusts the picture quality for video conferencing under fluorescent
lights.
Tips
• To change from one "Picture Mode" option to another, you can also use PICTURE on the
remote control instead.
• You can alter the "Picture Mode" options for each input.
Note
"Conference" may not be effective depending on the environment or the video conference
system under use. In this case, adjust the picture quality, switch to other settings of "Picture
Mode", etc.
You can make settings and adjustments for each "Picture Mode".
"Contrast": Adjusts picture contrast.
"Brightness": Adjusts to brighten or darken the picture.
"Chroma": Adjusts to increase or decrease color intensity.
"Phase": Adjusts the color tones of the picture.
"Sharpness": Adjusts to sharpen or soften the picture.
"Noise Reduction": Select to reduce the noise level of connected equipment. Select
from "Off", "Low", "Mid", "High" to set the noise level.
"CineMotion": Select "Auto" to optimize the screen display automatically
detecting film content and applying a reverse 3-2 pull down or 2-2 pull down
process. Moving picture will appear clearer and more natural looking. Select "Off"
to disable the detection.
"Dynamic Picture": Select "On" to enhance contrast by making white brighter and
black darker.
"Gamma Correct.": Balances the light and dark portions of pictures automatically.
Select from "High", "Mid", "Low" to make settings.
"Color Temp."
"Cool": Select to give the white colors a blue tint.
"Neutral": Select to give the white colors a neutral tint.
"Warm": Select to give the white colors a red tint.
"Custom": Allows you to store preferred settings of color tones.
"Reset": Resets all settings of "Picture Mode Adjust." to default settings.
Note
"Phase" is not available when the input is Video or S Video and the color system of video signal
is not NTSC.
To highlight an option and to change settings, press
F f G g
/ / / .
Press to confirm the selection.
The "Picture/Sound" settings include the following
options:
GB
21
GB