Sony FWD-50PX3 Manual De Instrucciones página 72

Aspect
Adjust Screen
Notes
• "Adjust Screen" is not available while using the "PAP" function or the "Multi Display".
• If there is no signal currently being input, none of the "Screen" settings options, except for "PAP Setting" and "Multi Display"
can be selected.
26
GB
"Wide Zoom": Select to enlarge to fill screen with minimum distortion.
"Zoom": Select to enlarge the original picture without distorting the aspect ratio.
See page 14.
"Full": Select to enlarge the original picture horizontally to fill the screen when the
original source is 4:3 (Standard definition source). When the original source is 16:9
(High definition source), select this mode to display 16:9 picture in original size.
"4:3": Select to display 4:3 picture in original size when the original source is 4:3
(Standard definition source).
Tips
• To change from one "Aspect" option to another, you can also use
• Select "Zoom" to display movies and other DVD content with black bands, using the entire
viewable area of the screen.
• For "Wide Zoom" and "Zoom" modes, you can adjust "H Shift", "V Shift" and "V Size".
See page 26.
Note
You cannot set the "Aspect" while using the "PAP" function or the "Multi Display".
"H Size": Allows you to adjust the size of the picture horizontally. Press G/g and
press to choose a correction.
"H Shift": Allows you to move the position of the picture left and right in the
window. Press G/g and press
"V Size": Allows you to adjust the size of the picture vertically. Press F/f and press
to choose a correction.
"V Shift": Allows you to move the position of the picture up and down in the
window. Press F/f and press
"Reset": Resets all settings of "Adjust Screen" to default settings.
to choose a correction.
to choose a correction.
on the remote control.