Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
V. Advanced operation
Note: Before installing this product, please make sure your device has the built-in
feature available.
Bluetooth
®
Pairing the speaker with your mobile device
1. Make sure the speaker is off.
2. Set your Bluetooth
phone to "discover" the wireless speaker.
®
3. Place both devices not more than one meter away from each other.
4. Press and hold the power button on the speaker to turn it on.
5. The blue LED starts blinking, accompanied by a short tone, to indicate that the
device has entered into the pairing mode and is ready to be detectable for the
first time.
6. On your mobile phone, tap the newly discovered audio device (KSB-050)
displayed in the Bluetooth
list.
®
7. When the speaker asks if you want to pair with it, click Yes or OK to accept.
8. If you have a lower Bluetooth
®
passkey 0000 (4 zeros).
9. If pairing is successful, a tone will be heard and the LED will turn solid blue. If
after 60 seconds the pairing process fails, please repeat steps 1 through 7
described above.
10. We recommend turning off the device when not in use. The speaker will shut
off automatically after a period of inactivity to conserve battery power
version, you may be prompted to enter the
Using the speaker with Bluetooth
1. Answering and ending a call using your mobile device
• When there is an incoming call, the speaker will generate a tone to alert you of this
event.
• Briefly press the
button to pick up. You may also press the answer button on
your cellular phone to take the call using the speaker.
• Speak with a clear voice right into the built-in microphone located on the side of
the speaker.
• To end a call, tap the
button once again. Likewise, you may also end the call
directly using the command on your cell phone.
• When listening to music using your mobile phone, playback will resume
automatically once the call has ended.
• By pressing the
button twice, the phone will redial the last number called (on
supported devices).
2. Music playback
• Use the
button to reproduce and stop music. In auxiliary mode, this
button will mute the audio from the speaker.
• Use the
button to decrease the volume level. Press and hold this button to play
the previous track. In auxiliary mode, only the volume command will work.
• Use the
button to increase the volume level (when the maximum level is
reached, the speaker will generate a short beep). Press and hold this button to play
the next track. In auxiliary mode, only the volume command will work.
technology
®
Publicidad
Tabla de contenido
