Volume Menu - Yamaha RX-V663 Manual De Instrucciones

2 VOLUME MENU

Use this menu to manually adjust the various volume
settings.
2 VOLUME MENU
.
ADAPTIVE DRC;;;;OFF
ADAPTIVE DSP
MUTE TYPE;;;;;;FULL
MAX VOL.;;;;+16.5dB
INIT. VOL.;;;;;;OFF
[ ]/[ ]:
[p]/[[]:
Adaptive dynamic range control
ADAPTIVE DRC
Use this feature to adjust the dynamic range in
conjunction with the volume level. This feature is useful
when you are listening at lower volumes or at night. When
"ADAPTIVE DRC" is set to "AUTO", this unit controls
the dynamic range as follows:
– If the VOLUME setting is low:
the dynamic range is narrow
– If the VOLUME setting is high:
the dynamic range is wide
AUTO
OFF
Input level
VOLUME: low
Choice
AUTO Adjusts the dynamic range automatically.
OFF Does not adjust the dynamic range automatically.
y
• You can also adjust the dynamic range of the bitstream signal
sources by using "DYNAMIC RANGE" in "SOUND MENU"
(see page 79).
• This function is also useful for listening with your headphones.
Note
The adaptive dynamic range control feature does not function
when this unit is in the Pure Direct mode (see page 52).
LEVEL;;;;OFF
Up/Down
Select
AUTO
OFF
Input level
VOLUME: high
Functions
Customizing this unit (MANUAL SETUP)
Adaptive DSP level ADAPTIVE DSP LEVEL
Use this feature to make fine adjustments of the DSP
effect level (see page 62) automatically in conjunction
with the volume level.
Choice
AUTO Adjusts the DSP effect level in conjunction with
the volume level.
OFF
Does not adjust the DSP effect level
automatically.
Note
Even if you set "ADAPTIVE DSP LEVEL" to "AUTO", this unit
does not change but the fine-tunes the specified value of "DSP
LEVEL" (see page 62).
Muting type MUTE TYPE
Use this feature to adjust how much the mute function
reduces the output volume (see page 45).
Choice
FULL Mutes all the audio output.
–20dB Reduces the current volume by 20 dB.
Maximum volume MAX VOL.
Use this feature to set the maximum volume level in the
main zone. This feature is useful to avoid the unexpected
loud sound by mistake. For example, the original volume
range is –80.0 dB to +16.5 dB. However, when "MAX
VOL." is set to –5.0 dB, the volume range becomes
–80.0 dB to –5.0 dB.
Control range: –30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
Notes
• When this unit is in the auto setup procedure, the volume level
is automatically set to 0 dB regardless of the current "MAX
VOL." setting.
• The "MAX VOL." setting takes priority over the initial volume
setting. For example, if "INI.VOL." is set to –20.0 dB and
"MAX VOL." is set to –30.0 dB, the volume level is
automatically set to –30.0 dB when you turn on the power of
this unit next time.
• Use "MAX VOL." in "ZONE SET" to set the initial volume
level in Zone 2.
Initial volume INIT. VOL.
Use this feature to set the volume level of the main zone
when the power of this unit is turned on.
Choices: OFF, MUTE, –80.0 dB to +16.5 dB
Control step: 0.5 dB
Note
The "MAX VOL." setting takes priority over the initial volume
setting.
Functions
Functions
77
En