Viewing two pictures at
the same time
You can show two pictures from different signal
sources, such as a computer and a video, side by side.
1
Press MENU.
The main menu appears on the screen.
PICTURE/SOUND CONTROL
Picture Mode:
Standard
Adjust Picture
Adjust Sound
Select
Set
ENTER
2
Press M/m to move the cursor (yellow) to
"PICTURE AND PICTURE (PAP)" and press
ENTER.
The PICTURE AND PICTURE (PAP) menu
appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Off
Active Picture
Picture Size
Picture Position
Select
Set
ENTER
3
Press M/m to move the cursor (yellow) to "PAP"
and press ENTER.
The following menu appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Off
Off
Active Picture
P&P
Picture Size
PinP
Picture Position
Select
Set
ENTER
4
Select the PAP mode with M/m.
Off: Disables PAP function.
P&P: Shows two pictures side by side at the same
time.
PinP: Shows an inset picture on the main picture.
5
Press ENTER to return to the previous screen.
Exit
MENU
Exit
MENU
Exit
MENU
Viewing two pictures at the same time
Activating a picture or swapping the
positions of two pictures
When P&P is selected
1
Press M/m to move the cursor (yellow) to "Active
Picture" and press ENTER.
The following menu appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
P&P
Active Picture:
Left
Picture Size:
Right
Picture Position
Swap
Select
Set
ENTER
2
Select the Active Picture mode with M/m and
press ENTER.
Left: Activates the picture on the left.
Right: Activates the picture on the right.
Swap: Swaps the position of the two pictures.
When PinP is selected
1
Select "Active Picture" with M/m and press
ENTER.
The following appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
PinP
Active Picture:
Main
Picture Size:
Sub
Picture Position
Swap
Select
Set
ENTER
2
Select the Active Picture mode with M/m and
press ENTER.
The audio corresponding to the currtly active
picture is output.
Main: Activates the main picture.
Sub: Activates the inset picture.
Swap: Swaps the main and the inset pictures.
Exit
MENU
Exit
MENU
33
(GB)