Dolmar RM-72.13 H Manual De Instrucciones página 121

MAINTENANCE
B
ATTERY
To ensure long life to the battery it is essential to keep it carefully maintained.
The machine battery must always be charged:
– before using the machine for the first time after purchase;
– before leaving the machine for a prolonged period of disuse;
– before starting up the machine after a prolonged period of disuse.
– Carefully read and comply with the procedure for recharging described in the
booklet coming with the battery. If the procedure is not followed or the battery
is not charged, irreparable damage could be caused to the elements inside the
battery.
– A flat battery must be recharged as soon as possible.
IMPORTANT
stant voltage. Other recharging systems can irreversibly damage the battery.
The machine has a connector (1) for recharg-
ing, to be connected to the corresponding
connector of the special "CB01" maintenance
battery-charger supplied (
available on request (chapter 8).
IMPORTANT
be used for connection to the "CB01" main-
tenance battery-charger. For its use:
– follow the instructions given in the relative
instruction booklet,
– follow the instructions given in the battery booklet.
R
EPLACING A FUSE
The machine is fitted with fuses (1) with differ-
ent capacities and functions. Specifically:
– 10 A fuse = protects the main and power cir-
cuits of the electronic board. When it blows,
the machine stops and the dashboard light
Recharging must be done using a battery charger at con-
➤
if included) or
This connector must only
1
EN 31
1