Care And Daily Cleaning - Bosch MMBM4 Serie Instrucciones De Uso

en

Care and daily cleaning

Working with the glass blender jug
X Fig. D
1. Hold the blade insert by the plastic
ring and insert it – blade first – into the
blender jug. Turn the blade insert anti-
clockwise until it audibly clicks into place.
2. Turn the blender jug over.
3. Insert the blender jug into its recess on
the motor block and turn it clockwise
until it audibly clicks into place.
4. Put the desired ingredients into the
blender jug.
5. Put the lid and locking cap in place.
6. Plug the mains plug into the mains.
7. Hold the lid firmly with one hand, but
don't place your hand over the filling
opening. Hold down the t or u button
until the mixture has reached the
desired consistency.
8. Release the button and wait until the
appliance comes to rest. Disconnect the
mains plug.
9. Turn the blender jug anti-clockwise and
then remove it.
10. Remove the lid.
11. Pour the blended food into another
container.
12. Turn the blade insert clockwise and then
remove it.
Caution!
Never set the blade insert down with the
blade underneath. This could damage
the blade and scratch your work surface.
X Fig. B
Clean all the parts. X "Care and daily
cleaning" see page 14
Adding more ingredients
X Fig. E
1. Release the button and wait until the
appliance comes to rest.
2. Remove the locking cap or the entire lid.
3. Add the extra ingredients.
4. Replace the lid and the locking cap, and
again hold down the t or u button.
Note: you can remove the locking cap by
turning it anticlockwise.
14
Care and daily cleaning
The appliance and all the attachments
and accessories used must be thoroughly
cleaned after each use.
W Risk of electric shock!
– Unplug the appliance before cleaning it.
– Never immerse the base unit in liquids
and do not clean in the dishwasher.
– Do not use a steam cleaner.
W Risk of injury!
Do not touch the blender blades with your
bare hands.
Caution!
– Do not use any cleaning agents
containing alcohol or spirits.
– Do not use any sharp, pointed or metal
objects.
– Do not use abrasive cloths or cleaning
agents.
Notes:
– It is best to clean the parts immediately
after use. This will prevent residues from
drying on and possibly attacking the
plastic (e.g. essential oils in herbs).
– Pour a little water and washing-up liquid
into the empty blender jug and hold
down button u for a few seconds.
– The plastic parts may become dis-
coloured when you process certain ingre-
dients, such as carrots, but this can be
removed with a few drops of cooking oil.
In Fig. F you will find a summary of how to
clean the individual parts.
Base unit
Wipe the outside of the base unit with a
soft, damp cloth and dry off.
Blade holder
Remove the seal before cleaning. Only clean
the blade holder with a brush under running
water. Don't leave it soaking in water!
X Fig. H