Bosch MUM5 Serie Instrucciones De Uso página 22

Ocultar thumbs Ver también para MUM5 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 125
en
Operation 
Warning!
Do not twist the cord when inserting it. If 
the appliance features an automatic cord 
winder, do not insert the cord manually. If 
the cord jams, pull out the cord all the way 
and then allow it to wind up.
  ■ Insert the mains plug.
Bowl and tools
W Risk of injury from the rotating tools
While the appliance is operating, never 
place fingers in the mixing bowl. Attach the 
cover (12) before operating the appliance! 
Do not change tools until the drive has 
come to a standstill – when the appliance 
is switched off, the drive continues running 
briefly and stops in the tool change position. 
Do not move the swivel arm until the tool 
has come to a standstill. 
Always secure unused drives with protective 
drive covers.
Attention!
Use bowl with this appliance only.
Stirrer (13)
for stirring dough, e.g. cake mixture 
Whisk (14)
for whisking egg whites, cream and 
light dough, e.g. sponge mixture
Kneading hook (15)
for kneading heavy dough and 
mixingin ingredients that ought not 
be cut (e.g. raisins and chocolate 
chips)
Working with the bowl and the tools
Fig. E:
  ■ Press the Release button and 
move the swivel arm to 
position 2.
  ■ Insert the bowl: 
Tilt the bowl forwards and then set it 
down. Turn anti­clockwise until it locks 
into place.
  ■ Depending on the processing task, insert 
the stirrer, whisk or kneading hook until it 
locks into position.
22 
Note:
If using the kneading hook, rotate the dough 
deflector until the kneading hook can lock 
into position (Fig. E-4b).
  ■ Put the ingredients to be processed into 
the bowl.
  ■ Press the Release button and 
move the swivel arm to 
position 1.
  ■ Attach the cover.
  ■ Set the rotary switch to the desired 
setting.
Our recommendation:
  – Stirrer: 
first stir in at setting 1 (1), then select 
setting 7 (4)
  – Whisk: 
setting 7 (4), mix in at setting 1 (1)
  – Kneading hook: 
first stir in at setting 1 (1), knead at 
setting 3 (2)
Adding more ingredients
  ■ Switch off the appliance with the rotary 
switch.
  ■ Add more ingredients through the feed 
tube in the cover.
or
  ■ Remove lid.
  ■ Press the Release button and 
move the swivel arm to 
position 2.
  ■ Add ingredients.
After using the appliance
  ■ Switch off the appliance with the rotary 
switch.
  ■ Remove mains plug.
  ■ Remove lid.
  ■ Press the Release button and 
move the swivel arm to 
position 2.
  ■ Take the tool out of the drive.
  ■ Remove the bowl.
  ■ Clean all parts, see "Cleaning and 
servicing".

Publicidad

Tabla de contenido
loading

Tabla de contenido