Best DC54MSB Manual De Instrucciones página 11

WIRING
Note: This Downdraft must be properly grounded. The unit should be installed
by a qualifi ed electrician in accordance with all applicable national and local
electrical codes.
1. Secure the electrical box to cabinet with (4) 4.2x15mm mounting screws (see
Fig.1).
2. Open the electrical box by unscrewing (4) screws (see Fig. 2).
3. Open the wiring box by unscrewing (4) screws (see Fig. 3).
4. Remove a knockout from the electrical box and insert a strain relief clamp.
5. Make electrical connections. Connect wires from blower to control:
Blower PF6: blue to blue, red to red, black to orange, white to white, green/yellow
to ground.
Blower PF3: blue to blue, red to red, orange to orange, white to white, green/
yellow to ground.
6. Reseal the wiring box and electrical box with screws. Make sure that wires are
not pinched between cover and box.
FIGURE 18
MOUNTING
SCREWS
(4.2 x 15 mm)
WIRING
BOX
- 11 -
BLOWER
STRAIN RELIEF
CLAMP
ELECTRICAL BOX