English; Safety Notes; Product Description And Specifications - Bosch PCL 10 Manual Original

OBJ_BUCH-693-005.book Page 9 Monday, September 5, 2016 10:17 AM

English

Safety Notes

All instructions must be read and observed
in order to work safely with the measuring
tool. The integrated protections in the
measuring tool may be compromised if the
measuring tool is not used in accordance
with the instructions provided. Never make warning signs
on the measuring tool unrecognisable. STORE THESE IN-
STRUCTIONS IN A SAFE PLACE AND INCLUDE THEM WITH
THE MEASURING TOOL WHEN GIVING IT TO A THIRD
PARTY.
 Caution – The use of other operating or adjusting
equipment or the application of other processing
methods than those mentioned here can lead to
dangerous radiation exposure.
 The measuring tool is provided with a warning label
(marked with number 7 in the representation of the
measuring tool on the graphics page).
 If the text of the warning label is not in your national
language, stick the provided warning label in your
national language over it before operating for the first
time.
Do not direct the laser beam at persons
or animals and do not stare into the
direct or reflected laser beam yourself,
not even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
 If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
 Do not make any modifications to the laser equipment.
 Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
 Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
 Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
 Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
Bosch Power Tools
 Do not operate the measuring tool in explosive environ-
Product Description and
Specifications
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines.
The measuring tool is suitable exclusively for operation in
enclosed working sites.
Product Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
14
10 Protective pouch
11 Laser viewing glasses*
12 Tripod*
* The accessories illustrated or described are not included as
standard delivery.
Technical Data
Cross-line Laser
Article number
Working range to approx.
Levelling Accuracy
Laser line width
– at a distance of 1.5 m
– at a distance of 5 m
Self-levelling range, typically
Levelling duration, typically
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
1) at 25 °C
2) The width of the laser line depends on the surface characteristics and
on the ambient conditions.
The measuring tool can be clearly identified with the serial number 8 on
the type plate.
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
1 Exit opening for laser beam
2 Automatic levelling indicator
3 On/Off switch
4 Latch of battery lid
5 Battery lid
6 Contact surface
7 Laser warning label
8 Serial number
9 Tripod mount 1/4"
1)2)
6
English | 9
PCL 10
3 603 K08 1..
10 m
±0.5 mm/m
<2 mm
<3 mm
±4°
4 s
+5 °C...+40 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
>10
1 609 92A 1Y3 | (5.9.16)