EPA
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal emissions requirement. Maintenance,
replacement or repair of the emission control devices
and system may be performed by any nonroad engine
repair establishment or individual.
CALIFORNIA AIR RESOURCES
BOARD (CARB)
Note: This machine is considered a preempt Off-Road
Application as relating to CARB standards. The U.S
EPA has sole authority to establish emission standards
for preempt construction equipment.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
General safety instructions
WARNING: Read the warning instructions
that follow before you use the product.
•
A power cutter is a dangerous tool if used carelessly
or incorrectly and can cause serious injury or death.
It is very important that you read and understand the
contents of this operator's manual. It is also
1447 - 001 - 16.04.2020
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Safety
recommended that first time operators also obtain
practical instruction before using the product.
•
Do not do modifications to this product. Modifications
that are not approved by the manufacturer, can
cause serious injury or death.
•
Do not operate the product if it is possible that other
persons have done modifications to the product.
•
Always use original accessories and spare parts.
Accessories and spare parts that are not approved
by the manufacturer, can cause serious injury or
death.
•
Keep the product clean. Make sure that you can
clearly read signs and decals.
•
Never allow children or other persons not trained in
the use of the product to use or service it.
•
Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
•
Only let approved persons operate the product.
•
This product produces an electromagnetic field
during operation. This field can under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
7