Cd Operation; Usb/Sd Operation - auna Kentucky 10033772 Manual De Instrucciones

EN
30

CD OPERATION

a. Press the MODE button until the LED display indicates "- - - -". The
display will then show the number of songs and then begin to start
playback.
b. Press  to select your desired song. Press fast forward, press to
fast forward to fast forward through a track. You can then press the
playback button to start playback.
c. To program, press the STOP button to stop playback. Then press
PROG to enter programming mode. The LED display will flash and
indicate "P 01". Select the song that you want to program and then
press PROG again. Press "Play/Pause" to stop programming and
start to play back the programmed songs. This unit can program up
to 20 songs.

USB/SD OPERATION

a. Press the "Mode" button until the LED display indicates "USB or
SD". The display will then show number of folders, then number of
songs and start playback.
b. Press " or Prev" or "F+/-10" to select your desired song.
c. Press REPEAT once on the remote control to repeat one song. The
REP indication in the top left corner on the LED display will flash.
Press the "REP" display "REP FOLDER" to repeat the album. Press
REPEAT one more time to repeat all songs in the track and the REP
indication in the top left corner on the LED display will appear.
Press REP again to cancel repeat function.
d. To play songs randomly, press the REPEAT button until the LED
display "RAN" on the bottom of the display.
e. For programming, press "STOP" button to stop playback. Press
"PROG" to enter programming mode. The LED display will flash
and indicate "P 01". Select the song that you want to program and
then press "PROG" again.
Press "Play/Pause" to stop programming and start to playback the
programmed songs. This unit can program up to 20 songs.
Note: when programming to store radio stations, local radio programs must
have a strong signal of 20 stations or more in order to store to 20 stations.
Otherwise, only the number of stations that can be received can be stored.