Returning The Speaker System And Recorder To Their Default Settings - Sony DAR-RD100 Manual De Instrucciones

Returning the Speaker
System and Recorder to
Their Default Settings
</M/m/,,
ENTER
SET UP
"/1
Resetting the speaker system
The following returns the speaker system settings
(for speakers, radio, etc.) to their defaults.
1
Press "/1 on the centre unit to turn on the
speaker system.
2
Hold down FUNCTION, and then press "/1
for about five seconds.
"COLD RESET" appears in the centre unit
display, and the speaker system settings return
to their defaults.
Resetting the recorder
You can reset the recorder to all its default
settings. Note that the [Parental Control], [Auto
Preset], [Clock], and [OSD] settings remain as
stored.
100
GB
AMP/DVD
switch
1 2 3
4 5 6
7 8 9
0
FUNCTION VOLUME VOLUME
FUNCTION
1
Set the AMP/DVD switch to DVD, and press
SET UP to turn on the Setup Display.
2
Select [Settings] and press ,.
3
Select [Factory Setup], and press ,.
Settings
Auto Preset
Channel Settings
Clock
TV Aspect
Display Mode
Line1 Decoder
Progressive Mode
PBC
Factory Setup
4
Press ENTER while [Start] is selected.
The display asks for confirmation.
5
Select [OK] and press ENTER.
Start