Playing Your Ipod; Using The Top Panel Buttons - Onkyo CBX-300 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Playing Your iPod

Using the Top Panel Buttons

The 3rd Generation iPod is not supported.
/
iPod
DISPLAY
1
Insert your iPod into the
CBX-300's iPod dock.
Make sure your iPod is properly seated
in the CBX-300's iPod dock.
The iPod will enter Pause mode.
Notes:
• Remove the CBX-300's protective
iPod dock cover, and be sure to install
the appropriate dock adapter before
inserting your iPod (see page 15).
• To prevent damage to the dock con-
nector, do not twist or force your iPod
into the dock, and be careful not to
wiggle your iPod while inserting it.
• Do not use with any iPod accessories,
such as FM transmitters and micro-
phones, as they may cause a malfunc-
tion.
• If you use a case with your iPod,
always remove it before you insert it.
Otherwise, it may not connect prop-
erly and a malfunction may occur.
2
Press the iPod Play/Pause
[
Playback starts.
Tip:
• If you press the iPod Play/Pause
[
is on Standby, it will turn on automat-
ically and the iPod will start playing.
30
En-
iPod
iPod dock
] button.
/
] button while the CBX-300
/
Notes:
• Before using your iPod with the CBX-300, be sure to
update your iPod with the latest software, available
from the Apple Web site.
• If you leave your iPod paused when using it on its
own, eventually it will go into hibernation. If you
insert it into the CBX-300 dock in this state, you'll
need to wait a few moments before your iPod is ready
for use.
• Always remove your iPod from the CBX-300 before
moving the CBX-300.
Selecting Tracks
To return to the beginning of the
track that's currently playing or
paused, press the Previous
[
/
] button.
Press the Previous [
/
earlier tracks.
Press the Next [
] button repeatedly to select
/
subsequent tracks.
Fast Forward and Rewind
To fast forward or rewind during
playback or while playback is
paused, press and hold down the
Next [
/
] or Previous
[
/
] button, respectively.
Pausing Playback
To pause playback, press the iPod
Play/Pause [
] button.
/
The Pause
indicator appears
on the iPod. Press the iPod
Play/Pause [
] button again
/
to resume playback.
iPod Backlight
To turn on your iPod's backlight,
press the [DISPLAY] button. The
backlight will remain on for 30
seconds.
] button repeatedly to select
Press and hold

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido