Presetting Fm/Am Stations Manually - Onkyo CBX-300 Manual De Instrucciones

Listening to the Radio—Continued

Presetting FM/AM Stations Manually

With the Preset Write function, you can manually preset individual FM and AM radio stations. Presets make it easy to
select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations.
FM stations can also be preset automatically (see page 33).
/
1
Tune into the station that you want
to store as a preset (see page 32).
2
Press the [MENU/NO] button, and
then use the Previous and Next
[
Preset Write?.
3
Press [ENTER].
The preset number flashes.
To cancel the Preset Write function at this
point, press the [MENU/NO] button.
4
Use the Previous and Next
[
preset.
5
To store the station, press
[ENTER].
If no station has yet been stored to the
selected preset, "Complete" appears and
the station is stored.
34
En-
MENU/NO
YES/MODE
ENTER
]/[ ] buttons to select
]/[ ] buttons to select a
About Presets
• You can store up to 30 stations as presets and this can be any
combination of FM and AM stations. For example, 27 FM
and 3 AM or 22 FM and 8 AM.
• Although FM and AM presets share the same numbers,
they're selected independently. For example, preset #1 will
store an FM station when the FM band is selected, and an AM
station when the AM band is selected.
• Stations can be stored to presets in any order. For example,
you could store preset #5 first, #1 second, and so on.
If a station has already been stored in the
selected preset, the message "Over-
write?" appears.
To overwrite the previously stored sta-
tion, press the [ENTER] or
[YES/MODE] button.
or
To not overwrite the previously stored
station, press the [MENU/NO] button.
If the message "Memory Full" appears,
all 30 presets have been stored and you'll
need to erase some presets before you
can store any more stations (see
page 39).
6
Repeat steps 1 to 5 to preset more radio
stations.
Note: (European models only)
• If the current FM station supports RDS and PS (Pro-
gram Service Name), the station's name will be dis-
played instead of the frequency. (See page 36 for more
on RDS.)
After Storing Presets You Can:
• Select them (see page 35)
• Name them for easy identification (see page 37)
• Copy them (see page 38)
• Erase them (see page 39)