Programming The Timers - Onkyo CBX-300 Manual De Instrucciones

Using the Timers—Continued

Programming the Timers

Notes:
• You must set the clock before you can program the
timers.
• Before programming a timer to turn on the radio, you
must preset the station you want to use. (See pages 33
and 34.)
• If you don't operate any buttons for 60 seconds while
programming a timer, the procedure will be cancelled
and the previous display will reappear.
STANDBY/ON
Number buttons
/
1 Press the [TIMER] button repeat-
edly to select timer 1, 2, 3, or 4, and
then press [ENTER].
If "Clock" appears first, you need to set
the clock (see pages 19 and 40).
2
Use the Previous and Next [
[ ] buttons to select Snooze On
or Snooze Off, and then press
[ENTER].
3
4
TIMER
ENTER
5
]/
6
Use the Previous and Next [
[ ] buttons to select the source,
and then press [ENTER].
You can select the following sources:
FM, AM, LINE, CD, or iPod.
If you selected LINE, CD, or iPod, pro-
ceed to step 5.
If you selected FM or AM, use the
Previous and Next [
tons to select the radio preset, and
then press [ENTER].
Use the Previous and Next [
[ ] buttons to select Once or
Every, and then press [ENTER].
Select Once for one-off operation. Select
Every to perform the same operation
every week.
If you selected Every, proceed to step 7.
If you selected Once, use the Pre-
vious and Next [ ]/[
tons to select the day, and then
press [ENTER].
You can select: SUN, MON, TUE, WED,
THU, FRI, or SAT.
Proceed to step 9.
]/
]/[ ] but-
]/
] but-
43
En-