Power Supply Cord; Memory Card - Tecno-gaz ONYX B 7.0 Instrucciones De Uso

Tighten the loading faucet (Fig.A-pos.04) to empty the loading tank and tighten the drain
faucet (Fig.A-pos.06) to empty the drain tank.
Picture
Envelope standard
Code
PIPE FOR DISCHARGE UTILITIES
1 - Clean water overflow hose: connect one end of the hose to the clean water overflow
hose fitting (Fig.A-pos.07), and the other in a water recovery container.
2 - Used water overflow hose: connect one end of the hose to the fitting (Fig. A–pos.05),
and the other to a used water recovery container.
Picture
Envelope standard
Code

POWER SUPPLY CORD

Take the power supply cord provided (pos.B) and insert the female plug (Fig.A-pos.03)
in the socket of the back panel of the autoclave then insert the male plug (pos.A) in the
electric plug of the system.
Picture
Envelope standard
Code

MEMORY CARD

Fig.9
1
CPRG096
Fig.10
2
SXBA799
Fig.11
1
CECG006
ENGLISH
11