Tecno-gaz ONYX B 7.0 Instrucciones De Uso página 62

ENGLISH
▲
• USE OSMOSI'S SYSTEM : On / Off with the button
osmosis device (
disconnected.
• CYCLES SINCE CHG: Cycles from the last change of filters are visualized.
• RESET OSMOSI COUNTER: It allows you to reset the counter when you replace the
filters
.
• CYCLES PERFORMED: Cycles from the last change of filter are visualized.
• RESET COUNTER: It allows you to reset the counter when you replace the filter.
• SHOW USERS: It allows you to see the already registered users.
• NEW USERS: It allos to register a new user.
• DELETE: It allows you to delete already registered users.
• LOAD CHECK: on/off (par. 10.6).
NEW USERS:
Access to the service menu (after password entry). This mode is reserved exclusively for
the setup by an authorised personal. The manufacturer shall not be held responsible
for any tampering with or injury to unauthorised staff.
16
00
▼
SETUP OSMOSIS SYSTEM
). When the system is activated the charge pump is
optional
BACTERIOLOGIC FILTER
ACCOUNT MANAGER
Press the central button to enter a new user.
ENTER NAME: When the box is flashing, press the
arrow keys to scroll the characters until the desired user
name, confirming each box with the button
ENTER PASSWORD: choose the desired password
using the same procedure the "enter name".
SERVICE MODE
When the box flashes press the arrows to
select the number of months before expiry.
Press the central button for the last time to
display the final selection page.
▬
the supply system with
▬
.