Register/De-Register A Handset; Removing A Handset; Automatic Selection - Topcom BUTLER E2100 TWIN Manual De Usuario

8

Register/de-register a handset

8.1 Register to a Butler E2100 base
You can subscribe 5 handsets to one base unit. Each handset can register to 4 base stations
and the user can select which base he wants to use. By default, each handset is subscribed
on the base unit upon delivery (base unit 1).
You only need to subscribe the handset if:
• The handset subscription has been removed from the base unit (e.g. for
reinitialisation).
• If you want to subscribe a different handset to this base unit.
The below procedure is only applicable to a Butler E2100 handset and base unit!
Remove the base power by unplugging the power cable at the back. Power up the base again
by plugging the power cable back in. The base will be in registration mode for 1 minute.
During this minute, you must do the following to subscribe the handset:
Press menu button
. Æ Select the number of the base unit you would like to subscribe the handset
press
OK
to (1-4) using the up
Enter the base pin code (0000) and press
Æ If the pin is wrong, the handset will mention it and will stop the registering procedure. Æ
When the handset is registered, it will show 'HANDSET' followed by the handset number.
8.2

Removing a handset

You can remove a handset from a base to allow another handset to be registered:
Press menu button
. Æ Enter the pin code (0000) and press
OK
want to remove and press
is successfully.
You can only remove existing handsets and others than the one you are
using.
8.3 Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4), you must select a base
unit because the handset can only communicate with one base unit at a time. There are two
possibilities:

8.3.1 Automatic selection

If you set handset to automatic selection, the handset will automatically choose the closest
base unit in standby:
Press menu button
. Æ Use the up
press
OK
. ÆUse the up
OK
Topcom Butler E2100 TWIN/TRIPLE
. ÆUse the up
OK
or down button.Æ Press the menu/OK button
. ÆUse the down
OK
. Æ The unit will go back to the previous menu if the removal
OK
. ÆUse the up
OK
or down button to scroll to 'SELECT BASE' and press
or down button to select 'AUTO' and press
Topcom Butler E2100 TWIN/TRIPLE
or down button to scroll to 'REGISTER' and
. Æ The unit will start searching for the base.
OK
button to scroll to 'DE-REGISTER' and press
. Æ Enter the handset number (1-5) you
OK
or down button to scroll to 'HANDSET' and
to confirm Æ
OK
.
OK
15