Manual Selection; Call Transfer And Conference Call During An External Call; Internal Call (Intercom) - Topcom BUTLER E2100 TWIN Manual De Usuario

Topcom Butler E2100 TWIN/TRIPLE

8.3.2 Manual selection

If you set handset to manual selection, the handset will only choose the handset you have
set:
Press menu button
. Æ Use the up
press
OK
. ÆUse the up
OK
or down button to select base 1-4 and press
8.4

Call transfer and conference call during an external call

These functions only work when more than one handset (like a Twin/Triple/
Quattro version) is registered to the base!
During an external call, press the
handset.
Æ The other handset will start to ring:
– When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other handset.
If you press and hold the
handset and external line at the same time (conference call)
– Or press the
Æ Press the on-hook button
8.5

Internal call (intercom)

• In standby press the
• The other handset will start to ring. You can stop the ringing by pressing the on-hook
button .
• If the other handset answers the call by pressing the off-hook button
internally.
• Press the on-hook button
9 Reset of the handset
This will undo all changes and set back all default settings (ringer volume, ringer melody,
etc...).
Press menu button
. Æ Use the up
press
OK
again to confirm. ÆEnter the pin code (0000) and press
Press
OK
go back to standby.
Default handset settings are:
Handset volume
Handset melody
Flash time
Dial mode
Ringer On/Off
Auto Talk
16
. ÆUse the up
OK
or down
or down button to select 'Manual' and press
-button followed by the number (1-5) of the other
-button for 3 seconds you can talk with the 2nd
-button again to return to the external call.
to end the call.
-button followed by the number (1-5) of the other handset.
to end the call.
. Æ Use the up
OK
or down
3
8
Short
Tone
On
Off
or down button to scroll to 'HANDSET' and
button to scroll to 'SELECT BASE' and press
.
OK
or down button to scroll to 'HANDSET' and
button to scroll to 'RESET' and press
. Æ Use the up
OK
you can talk
. Æ The unit will
OK
Topcom Butler E2100 TWIN/TRIPLE
. Æ
OK