Installation - Comeg SOPRO 218 Manual De Usuario

5

Installation

Take care that the location of the light source is well-ventilated (minimum 15cm space on
left, right, and rear side of the light source).
5.1. Connection of the front panel
• This light source is equipped as standard with a Storz light cable adapter .
1
C1
• Insert your light cable in the "light guide" hole until a «click» is heard.
• Connect your endoscope to the other tip of the light cable.
5.2. Connection of the back panel
C2
• Connect the power cable to the mains plug of the light source .
• Connect this power cable to the mains.
• If needed, connect a grounding cable to the ground contact identified with a green and
yellow washer and the following sign:
For the USA and Canada, you must use the "hospital grade" cable supplied and connect it
to a "hospital grade" mains outlet.
1. Other adapters available on request.
12