Description Of The Rear Panel; Mains Plug - Comeg SOPRO 218 Manual De Usuario

7 Description
of the rear panel

7.1. Mains plug

The light source is powered via its mains plug, which must be linked to the mains accordingly
to the specifications listed on the rear panel.
This plug includes a fuses trap. The 2 fuses are of T 4 A. The T of "T 4 A" means "temporised".
During a fuses change, it is imperative to disconnect the light source from the mains and
to use the same type of fuses. UL/CSA only.
7.2. Identification and symbols on the back panel
The indications and symbols mentioned on the back panel allow identifying the light source in
conformity with the International standards IEC 60601-1 and comply with the requirements of
the 93/42/EEC European standard.
14