Belt Or Brushbar: Removal & Replacement; Lightbulb: Removal & Replacement - Dirt Devil Ud70095 Manual Del Propietário

BELT OR BRUSHROLL: REMOVAL AND REPLACEMENT
TOOL REQUIRED: Phillips screwdriver
WARNING: To reduce risk of injury from moving parts - unplug before servicing.
TO REMOVE BELT
1.
Be sure unit is off and unplugged. Lay cleaner flat and flip
cleaner to expose nozzle base. Base should lay flat and face
up. To remove nozzle guard, use Phillips screwdriver to
remove the SIX (6) screws. Arrows show location of screws.
BELT STYLE
For belt replacement, please visit our website at www.dirtdevil.com to buy online
23
or call customer service at 1-800-321-1134.
TO REPLACE BELT
1. 2.
Slide belt onto motor shaft. Place new belt in area of
brushroll without bristles.
4. 5.
Replace nozzle guard onto Replace all six (6) screws to
base of cleaner. secure nozzle guard.
LIGHTBULB: REMOVAL OR REPLACEMENT
IMPORTANT: Do not attempt to remove or replace the light bulb yourself.
Call 1-800-321-1134 or visit our website at www.dirtdevil.com to locate the nearest service center.
2. 3.
Remove nozzle guard Lift and remove brushroll.
by lifting off. Dispose of old belt.
Belt Style 23
3.
With new belt in place, pull and slide brushroll into
nozzle making sure that the brushroll end caps are
in the correct orientation. Rotate brushroll manually
to make sure belt is properly aligned.
9