General Maintenance - Dirt Devil Ud70095 Manual Del Propietário

GENERAL MAINTENANCE

WARNING: To reduce risk of injury from moving parts - unplug before servicing
• Check to see if dirt container is full; empty if needed.
• Plug cleaner in and check to see if there is any suction at end of hose.
DEBRIS REMOVAL/NOZZLE GUARD
1.
1. Unwrap hose from caddy. Twist and unlock to remove clogs. Clean out hose
with a broom handle. Check access door on back of cleaner (near hose end).
Remove the seven (7) screws and check for obstruction.
2. Remove dirt container (Pg. 7) and check dirt container inlet located on
cleaner.
DEBRIS REMOVAL/TURBO TOOL ®
3.
4.
Roll O-Ring back and turn Pivot lower housing and remove
Turbo Tool over Pivot lower clog.
housing and remove clog.
2.
3. Remove nozzle guard by
removing the six (6) screws.
Remove obstructions (Refer to
Page 9 for belt and brushroll
removal and replacement).
5.
To reassemble, be sure tabs are
engaged. Pivot the lower hous-
ing closed. Roll O-Ring back into
groove to secure.
10