Best CC45 Manual De Instrucciones página 6

FIGURE 2
INSTALL THE DUCTWORK
NOTE: To reduce the risk of fire, use only
metal ductwork.
1. Decide where the ductwork will run
between the hood and the outside.
2. A straight, short duct run will allow the
hood to perform most efficiently.
3. Long duct runs, elbows, and transitions
will reduce the performance of the hood.
Use as few of them as possible.
4. Install a roof or wall cap. Connect 10"
round metal ductwork to cap and work
back towards hood location. Use duct
tape to seal the joints between ductwork
sections (Fig.3).
IN-LINE BLOWER
FIGURE 3
HOOD
24" TO 30" ABOVE
COOKING SURFACE
- 6 -
ROOF CAP
6" MINIMUM
ROUND DUCT
ROUND
ELBOW
WALL
CAP