MODULE INSTALLATION
H
old the module on the embedding box.
Select a direction to open the module; this selection should ease
the door panel wiring.
The opening direction will be settled through the hinges position,
that must be passed through the header clips as shown.
For example, if the hinges are placed on both clips of the lower
header, the module will open downwards; if they are placed
on the right clips of both headers, the module will open to left.
To hold the module on the embedding box,
insert the hinges in the embedding box lockers
as shown.
Connect the wiring according to the installation
diagrams on pages 33 to 35.
Pay special attention to follow the specified order
for each connection on the pcb silk.
C
lose the module.
Fix the module by using the supplied screws.
Finish the module assembly by pressing
the closing heads.
27
28
a.
Light emitters for accepted card (green) and denied card (red) indication.
b.
Memory position display.
c.
Detachable terminal connectors.
+, – :
L+, L– :
COM :
MODULE DESCRIPTION
Power supply input.
Do not use.
BP :
External push button input.
Relay common terminal.
NO :
NO relay output.
NF :
NC relay output.
M
odule description.
a
b
c
d