Steren AMP-025 Manual De Instrucciones página 25

Charge the battery
Before using the amplifier for the first time, charge the battery for 12 continuous hours.
Insert the voltage converter into the corresponding input of the amplifier and connect it to
the electric current. The charging LED on the amplifier will turn red in the process; Will turn
green when charging is complete.
Turning the amplifier on / off
Make sure that all volume controls
Are at the lowest level.
Press the switch to turn it on or off.
Using the remote control for the first time
Remove the protective plastic from the battery.
To control playback at a distance,
Remote control towards the front of the amplifier
Replace Battery
INSTRUCTIONS
8