TROUBLESHOTTING GUIDE
Case 1. Do no start on
Check that the fuel is not in a bad state.
Check that the fuel does not leak from
the exhaust
Check that the fuel is not in a bad plug
Case 2. Not enough power/Poor accelerator / Unequal idle speed
Check that the fuel is not in a bad state.
Check the air´s filter and the fuel´s filter
are not dry
Possibily the carburator is not been fitted
properly.
Case 3. Does not lubricate
Check that the lubrications orifices are
clean.
If it seems that the chainsaw needs an adittional maintenance, please take it to
the nearest Garland service.
Replace it with a suitable fuel.
Remove and dry the spark plug.
Replace it with new plug
Replace it with a suitable fuel.
Clean them
Take it to the technical service so they can fit the needles
of the carburator
Clean them.
70