L.B.White L-40 Manual De Uso página 11

STEP 6 - ORIFICE HOLDER AND AIR
INLET PLATE
Turn the brooder over.
Gently bend the flexible gas line towards the burner.
Position the orifice holder and air inlet plate to the
burner.
While holding the orifice plate in the burner cup,
slide the burner retention clip along the orifice holder
and under the burner cup to secure the orifice holder
and air inlet plate in place. See Fig. 7a. DO NOT
spread the clip to fit it over the orifice holder and
burner as this may distort the retention clip. See Fig.
7b. Ensure the clip is positioned evenly and air inlet
plate is seated correctly in the burner cup. See Figs.
7c and 7d.
FIG. 7a - CORRECT
Retention
Clip
FIG. 7c - CORRECT
Air inlet plate
sitting inside
burner cup.
L-40 / H-40 Spark Ignition Radiant Brooder
FIG. 7b - INCORRECT
Orifice
Holder with
Inlet Plate
Burner
FIG. 7d - INCORRECT
Air inlet plate
misaligned
with burner
Owner's Manual • L-40 / H-40
cup
11