Heater Assembly Instructions; Step 1: Burner To Emitter; Step 2: Hanging Bracket With Control Box To Canopy; Step 3: Emitter Assembly To Canopy - L.B.White L-40 Manual De Uso

Heater Assembly
Refer to steps 1 through 6 for heater assembly,
using the supplied hardware as shown below.
HARDWARE SIZE & QUANTITY:
A B C
ITEM DESCRIPTION
A. Nut, 5/16-18,
B. Nut, 1/4-20
C. Screw, #8 x 3/8
D. Bolt, 1/4 - 20
STEP 1 - BURNER TO EMITTER
FIG. 2
Insert burner's
threaded mounting
stud up through
emitter hole
L-40 / H-40 Spark Ignition Radiant Brooder
D
Securely attach bracket
to canopy top using Qty.
1 nut, item B, and Qty. 1
Bolt, Item D
QTY.
1
4
6
1
Secure the burner to the
emitter using Qty. 1 Nut,
Item A.
Emitter's weld
seam
Align ignitor to emitter's
weld seam.
Owner's Manual • L-40 / H-40
STEP 2 - HANGING BRACKET WITH
CONTROL BOX TO CANOPY
FIG. 3
STEP 3 - EMITTER ASSEMBLY TO
CANOPY
FIG. 4
Ensure bracket holes
align to holes in canopy lip
before attaching bracket
to canopy
Securely attach the emitter
to the underside of the
canopy using Qty: 3 Nuts,
Item B
One threaded stud of
emitter also passes
through hanging
bracket hold
9