4. Use/Operators
4.1 Proper use
The linear unit must be used exclusively for a linear process and positioning of workpieces, units,
measuring devices or for other comparable setting tasks in industrial plants.
Catalogue information, the contents of these installation instructions and the conditions laid
down in the order are to be taken into account.
The values given in these installation instructions are maximum values and must not be exceeded.
Any use beyond this is termed as non-intended. If the linear unit is used improperly, then RK Ro-
se+Krieger GmbH ceases to be liable and the general operating licence of this linear unit will be
void.
4.1.1 Reasonably predictable improper uses
•
Use in an environment where these is a risk of explosion (if used in explosive areas sparks can
lead to detonations, fire or explosions)
•
Use of the linear unit with permitted forces/torques exceeded
•
inadequate securing of the linear unit
•
inadequate securing of the loads to be moved
•
Loads which exceed the quoted limits
•
Use where there is direct contact with foodstuffs, pharmaceutical or cosmetic products.
•
Use in the open air
•
Use in an environment with air humidity > dewpoint
•
Use in a heavily contaminated environment
•
Use in extremely dusty atmospheres
•
Use in an atmosphere containing solvents
•
Animal processing
•
Use in liquids
4.2 Who can use, install and operate this linear unit
Individuals who have read and understood the installation instructions completely can use, install
and operate this linear unit. Responsibilities for handling this linear unit must be clearly laid down
and obeyed.
34