Berkel BF+15F Manual De Uso Y Manutención página 26

1.6.3 - Lighting
The place where the machine is installed must have adequate natural and artificial
lighting that complies with the laws in force in the country the sack filling machine
is installed in.
In any case the lighting must be uniform and guarantee good visibility in every
point of the machine and it must not create dangerous reflections.
The lighting must enable a clear reading of the control panel and easily individua-
ting the emergency push buttons.
1.7 -
Registration data
An exact description of the "Model", the "Serial number" and the '"Construction
year" of the machine will facilitate quick and efficacious responses on behalf of our
technical assistance service. It is advisable to indicate the machine model and the
serial number every time you contact the assistance service.
Observe the data on the plate shown in fig. 1.7.1.
As a reminder we suggest writing the data from your machine in the following
square.
Sack filling machine model ...............
Serial N° ......................................
Year of construction........................
Tipo.............................................
L
A
C
D
G H
ATTENTION!
Never alterate the data shown on the plate for any reason.
B
F
E
A = machine model
I
B = serial number
C = motor tension Volt
D = motor power Hp
E = motor frequency Hz
F = motor power Kw
G = Ampére
H = machine weight Kg
I = year of production
L = producer
8
Fig. 1.7.1