Athletic Home Gym Manual De Instrucciones página 10

Assembling the
STEP 3
Top structure
1. Position the Upper Frame on the
Tower, snapping it in weight guide
tubes.
2. Attach it using [2] M10x60 screws,
[4] M10 washers and [2] nuts in the
tower. Use [2] M10x20 screws and [2]
M10 washers for the tubes.
3. Attach the [3] Plastic caps in the
Upper Frame.
4. Position the Arms support in the
Upper structure, aligning the holes.
STEP 4
Assembling the Arms
Upper frame
Arm support
Arm
Tower
5. Attach using [1] Shoulder bolt, [3] Washers M12, [1] Washer M10
and [1] Nut.
6. Attach the [4] Plastic caps in Arms support.
7. Attach the Arms support at the Tower with the aid of Fixing pin
for facilitate the next assembly step.
10
Fixing pin
1. Attach the Arm in Arms support
using [1] Shoulder bolt, [2] M12
washers, [1] M10 washer and [1] nut.
2. Insert the Foam roller and the
Plastic cap on Arm.
3. Insert the Handle in the arm hole
and attach with [1] screw and [1]
M10 washer.
4. Repeat the same procedure in the
other side of the product.