Assembling The Accessories - Athletic Home Gym Manual De Instrucciones

Assembling the Pulleys
STEP 9
and the Lower cable
Hook
Lower cable
1. Pass the lower cable through the Seat support and the Tower , fixing it in the hook on the lower structure.
2. Insert the Pulleys in Seat support and the Tower, all above the Lower cable. Attach them with [1] M10x55 Screw, [2]
pulley spacers, [2] Washers and [1] Nut for each.
3. Attach the Pulley in lower frame, using [1] M10x45 Screw, [2] Washers and [1] Nut.
4. Pass the Lower cable above [1] Pulley between the Pulleys of the Lower Frame and the Tower. Attach it in the Cross
support using [1] M10x45 Screw, [2] Washers and [1] Nut.
5. Pass the Lower cable above [1] Pulley between the Hook and the Pulley of the Lower frame. Attach it in the
Adjustment plates using [1] M10x45 Screw, [2] Washers and [1] Nut.
STEP 10
1. Attach the accessories in the Upper or Lower cable using the Carabiners and Chain.
NOTE: Each bar may be used both at the top as at the bottom, depending on your desired workout.
To facilitate attachment of the bar in the lower cable, select the minimum weight.
Cross support

Assembling the Accessories

13