Athletic Home Gym Manual De Instrucciones página 11

Assembling the Seat frame
STEP 5
Seat support
3. Position the Leg extensor on
the Seat support aligning the
holes. Attach it using [1]
Shoulder bolt, [1] M10 washer,
[1] M12 washer and [1] nut.
4. Insert [2] plastic caps at the
ends and [1] plastic cap in the
middle.
5. Insert the Roller tubes and
Foam rollers, and then insert the
Tube caps.
Assembling the Seat
STEP 6
and Backrest
and Leg extension
Plastic cap
Seat frame
Plastic cap
Leg extensor
1. Attach the seat at the Seat frame using [4]
M8x15 screws and [4] Washers.
2. Attach the backrest in the Tower using [2]
M8x65 screws and [2] Washers.
11
1. Position the Seat support on
the Lower structure aligning
the holes and fasten it using [1]
screw, [2] M10 washers and [1]
nut.
2. Position the Seat frame
between the Tower and the
Seat Support aligning the
holes, then attach it using [3]
screws, [6] M10 washers, [3]
nuts and [1] Fixing plate.